Q. Does a fiberglass pool “pop out” of the ground?

A. NO! Engineers will tell you that it is impossible for any pool to “pop out” of the ground when it is full of water. However, just like any pool … gunite, vinyl liner or fiberglass … lowering of the water level below recommendations will result in an uneven pressure and possibly result in damage.

Q. Why a fiberglass pool?

A. We’ll let Money Magazine answer this one. An article on swimming pools stated that “one piece fiberglass pools are easiest to maintain”. The story noted that “vinyl liner pools can develop a tear in the liner from a sharp belt buckle” and “the entire liner slowly deteriorates in sunlight” and must be periodically replaced. Money noted that gunite pools are more expensive and because the “plaster surface is rougher than … fiberglass it is more hospitable to algae and bacteria.” And, we add that gunite pools often require re-painting and plastering.

Q. How long does it take to install a pool manufactured by Royal Fiberglass Pools, Inc.?

A. Usually 3 to 5 days, weather permitting.

Q. What does installation involve?

A. A hole is excavated to accommodate the pool model that you have purchased. Then, the bottom of the hole is contoured with sand to ensure a perfect fit. The pool is lowered into position and leveled and, while the pool is being filled, the sand is water-compacted around the edge to lock it in place. All plumbing and electricity is connected, pump and filter installed, decking built and, when completed, you are ready to enjoy your Royal Fiberglass Pools, Inc. pool or spa.

Q. How do you deliver the one-piece pool?

A. Depending on access, we normally truck-deliver the pool or spa to your location and then lift it with a crane to its final resting place. There have been situations where we have actually air-lifted pools into position using a helicopter. And we have even delivered by water…using the pool as a boat!

Q. What kind of decking may I use around my pool?

A. The standard is a plain concrete deck. However, special coatings can enhance the use and appearance of a concrete deck. Other surfaces can also be constructed … use your imagination!

Q. What features are standard in a pool manufactured by Royal Fiberglass Pools, Inc.?

A. Your Royal pool includes a built-in coping, molded, non-slip surface steps and benches.

Q. What accessories are standard?

A. Our complete pool installation package includes a skimmer, main drain and return inlets … it’s ready to enjoy once installed.

Q. What are the optional accessories?

A. Automatic pool cleaner, water heater, additional decking, slide, diving board, extra jets, winter cover, solar blanket and reel auto cover, ozone purification, ceramic tile, landscape lighting, fiber optic lighting, handrails, spill-over spas, water features and ladders.

Q. How durable is a fiberglass pool?

A. The pool’s seamless construction withstands extreme environmental changes and can flex up to twelve full inches without damage. Our pools are engineered to be up to seventeen times stronger per inch than concrete pools. This remarkable flexing feature makes the fiberglass pool the most resilient to any weather and/or soil condition. No other pool comes close.

Q. How difficult is a fiberglass pool to maintain?

A. Maintenance is easy allowing you to spend more time enjoying your pool. The gel coat finish is smooth, hard and non-porous making it resistant to algae. This feature reduces chemical usage and maintenance costs. Unlike other types of pools, there is never a need to drain a one-piece fiberglass pool. And remember, a well maintained fiberglass pool will never require resurfacing.

Q. May I move my fiberglass pool to another location?

A. When you move, your pool can go with you.

Q. Where is Royal Fiberglass Pools, Inc. located?

A. Royal Fiberglass Pools, Inc. has manufacturing facilities in Breaux Bridge LA and Dix IL, centrally located to serve our nationwide dealer network. Our corporate offices are in Breaux Bridge.